Leonard Valve Megatron XL-200-SW-2P-LF Wax LF Complete Water Temperature Control Station

Call for pricing & availability: 1-833-251-4591

Write a Review
Availability:
Usually Ships in 7 to 10 Days
Manufacturer Part Number:
Megatron XL-200-SW-2P-LF
Inlets:
3"
Outlet:
3"
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov

Leonard Valve Megatron XL-200-SW-2P-LF Wax LF Complete Water Temperature Control Station

 

LEONARD MEGATRON® MODEL XL200-2P-LF Complete Water Temperature Control Station to include:

• 3” bottom inlet connections (copper tube)

• 3” top outlet connection (copper tube)

• 1 ½” return line size with piping method #W

• Copper encapsulated thermostatic assembly with Teflon coated shuttle

• Locking temperature regulating handle set for 120oF (49oC)

• Full port ball valve, pressure gauge and thermometer on mixed water outlet piping of mixing valve.

• Dial thermometer (range:0 to 140F, -10 to 60C) and pressure gauge on mixed water outlet of the system.

• Outlet Test Connection with ball valve and 1”

• Full port ball valve mounted downstream of test connection on mixed water outlet of the system

• Inlet piping manifold with full port ball valves and dial thermometers (20 to 240F, -7 to 116C on hot supply, 0 to 140F, -10 to 60C on cold supply) on hot and cold supply inlets

• Return piping, 1 ½”, with aquastat, circulator, dial thermometer (0 to 140F, -10 to 60C), balancing valve (with positive shutoff) to balance system, and check valve

• Aquastat with temperature differential of 5 to 30F (3 to 17C)

• GFCI* switch. The GFCI switch will be used to turn the circulator on or off for setup. *Ground Fault Interrupter

• Bypass piping, 1 ½” with check valve and isolation ball valve to cold inlet of mixing valve

• Maximum operating pressure: 125 PSIG (860KPA)

• System mounted on strut, galvanized. Strut shall be assembled with three hole flat angle plate on corners, four hole tee plates or two hole flat plate connectors on all other support pieces using 3/8” grip lock nuts and 3/8”x 1” hex head cap screws, washers and lock washers.

• Factory pre-assembled and tested as a complete system

• All electrical connections to be completed by Electrical Contractor

• B&G PL55B standard pump included and installed

• Optional Taco smart pump, 0034E PLUS, see options page for more info

 Quality Plumbing Supply is a proud distributor of Leonard Valve products. This Leonard Valve Megatron XL-200-SW-2P-LF Complete Water Temperature Control Station is a direct replacement manufactured by Leonard Valve. Order this Megatron XL-200-SW-2P-LF today! Usually ships in 7-10 business days. Some products may incur additional freight charges.