Genuine Leonard Valve TM-5125-LF-RF-STSTL-EXP Emergency Mixing Valve System with Temperature Override Protection.
PRIMARY EMERGENCY WATER MIXING VALVE
- DURA-trol® solid bimetal thermostat directly linked to valve porting to control the intake of hot and cold water and compensate for supply temperature and pressure fluctuations. DURA-trol is highly responsive and cannot be damaged by extremes in temperature
- Primary valve can be set to the correct temperature for the application.
- Locking type temperature regulator to prevent accidental movement set for 85ºF (29ºC)
- Primary mixing valve will close down on failure of cold water supply
- Primary Mixing Valve with special internal cold water bypass capable of 40 GPM (151 l/min) @ 30 PSI (2.1 Bar) upon failure of hot water supply
- Adjustable high temperature limit stop set for 90ºF (32ºC)
- Integral wall support
- Full 1¼” top inlets and 1½” top outlet
- Dial thermometer (range 0 to 140°F, -10 –60°C)
- Rough bronze finish
- Union angle checkstops on inlets
- Compliance…………ANSI Z 358-1 2004
- Exposed Stainless Steel Cabinet
REDUNDANT THERMOSTATIC MIXING VALVE
- Stainless steel bellows thermostat is factory locked @ 90°F, 32°C (adjustable from 40 °F to 100°F, 4°C to 32°C) to allow cold water to enter the outlet side of the Primary mixing valve.
- Remains fully closed until outlet temperature reaches 90ºF (32ºC)
- Will keep maximum temperature at 90ºF should primary valve allow water in excess of 90ºF (32ºC)
- Rough bronze finish
- Maximum supply temperature 180ºF (82ºC)
- Maximum supply pressure 125 PSI (8.6 Bar)
Quality Plumbing Supply is a proud distributor of Leonard Valve products. This Leonard TM-5125-LF-RF-STSTL-EXP Emergency Mixing Valve System with Temperature Override Protection is a direct replacement manufactured by Leonard Valve. Order this Leonard TM-5125-LF-RF-STSTL-EXP Emergency Mixing Valve System with Temperature Override Protection today. Most orders usually ship in 7-10 Business Days, some items may incur an additional shipping charge.
