Leonard Valve Megatron 270-LF Complete Water Temperature Control Station
Minimum flow 0.25 GPM *
Lead Free Bronze body
Locked temperature adjustment cap (vandal resistant)
Copper encapsulated thermostat assembly with polymer thermoplastic shuttle
Stainless steel springs Integral check valves on hot and cold inlets
½” copper tube connections, inlets and outlet
Maximum operation pressure: 125 PSI (860 KPA)
Temperature selector handle with scale: COLD-HOT
Dial thermometer (range 0 to 140°F, -10 to 60°C) on outlet
Temperature adjustment range, 90-140ºF (32-60ºC) **
Outlet Test Connection ball valve and ¾” hose connection with cap
Full port ball valve mixed water outlet of the system
Inlet piping with full port ball valves and dial thermometers (20 to 240°F, -7 to 116°C on hot supply, 0 to 140°F,-10 to 60°C on cold supply) on hot and cold supply inlets
Return piping, ½”, with aquastat, circulator (TACO 006, 4gpm @ 6ft head), dial thermometer (0 to 140°F, -10 to 60°C), balancing valve (with positive shutoff) to balance system, and check valve.
Bypass piping, ½” with check valve and isolation ball valve to cold inlet of mixing valve
System mounted on strut, galvanized. Strut shall be assembled with three hole flange angle plate on corners, four hole tee plates or two hole flat plate connectors on all other support pieces using 3/8” grip lock nuts and 3/8” x 1” hex head cap screws, washers and lock washers
Factory pre-assembled and tested as a complete system
All electrical connections to be completed by Electrical Contractor
Quality Plumbing Supply is a proud distributor of Leonard Valve products. This Leonard Valve Megatron 270-LF Complete Water Temperature Control Station is a direct replacement manufactured by Leonard Valve. Order this Leonard Valve Megatron 270-LF today! Usually ships in 7-10 business days. Some products may incur additional freight charges.
