Leonard Valve NV-150-LF-IF-R100 Recirculating Nucleus Electronic Mixing Valve
Digital Mixing Valve with 1-¼” inlet ball and check valves, 1-½” Outlet with ball valve and integral RTD Sensor
Additional Integral RTD Sensors for three critical measurement points: Inlet Hot Water, Inlet Cold Water, and Return Water temperature
Additional Integral Pressure Sensors for two critical measurement points: Inlet Hot Water and Inlet Cold Water
Maximum operating pressure: 125 PSIG (860KPA)
1-¼" inlets, 1-½" outlet (31.8mm X 38.1mm)
0.25 GPM** (0.95 L/min) minimum flow capacity
Controls water temperature to ± 2°F in accordance with ASSE 1017
Controls water temperature to ± 2°F at the NV-150-LF during times of low/no system demand
Automatic Hot/ Cold Water shutoff upon cold/ hot water inlet supply failure
User programmable for on-site configuration, high-temperature sanitization mode, and high/ low temperature alarm
User adjustable settings at the controller or remotely through a Building Automation System/ Building Management System
Six standard BMS Protocol Languages on-board communication
Cloud based data logging and monitoring capabilities
User programmable set point range between 65°F and 180°F
Options to display 4 additional temperature inputs, 1 flow channel input, & 1 configurable flow or pressure
UL Listed 120V plug in power supply with 6’ cord
Option for Backup Uninterruptable Power Supply in the event of primary power loss w/ approx. two hours run time
Factory assembled and tested
Quality Plumbing Supply is a proud distributor of Leonard Valve products. This NV-150-LF-IF-R100 Nucleus Electronic Mixing Valve is a direct replacement manufactured by Leonard Valve. Order this NV-150-LF-IF-R100 today! Usually ships in 7-10 business days. Some products may incur additional freight charges.
