Leonard Valve NV-200-LF-IF-R125 Recirculating Nucleus Electronic Mixing Valve
Digital Mixing Valve with 2” inlet ball and check valves, 2” Outlet with ball valve and integral RTD Sensor
Additional Integral RTD Sensors for three critical measurement points; Inlet Hot Water, Inlet Cold Water, and Return Water temperature
Additional Integral Pressure Sensors for two critical measurement points; Inlet Hot Water and Inlet Cold Water
2" inlets, 2" outlet (50.8mm X 50.8mm)
0.25 GPM** (0.95 L/min) minimum flow capacity
Maximum operating pressure: 125 PSIG (860KPA)
Controls water temperature to ± 2°F in accordance with ASSE 1017
Controls water temperature to ± 2°F at the NV-200-LF during times of low/no system demand
Automatic Hot/ Cold Water shutoff upon cold/ hot water inlet supply failure
User programmable for on-site configuration, high-temperature sanitization mode, and high/ low temperature alarm
User adjustable settings at the controller or remotely through a Building Automation System/ Building Management System
Six standard BMS Protocol Languages on-board communication
Cloud based data logging and monitoring capabilities
User programmable set point range between 65°F and 180°F
Options to display 4 additional temperature inputs, 1 flow channel input, & 1 configurable flow or pressure
UL Listed 120V plug in power supply with 6’ cord
Option for Backup Uninterruptable Power Supply in the event of primary power loss w/ approx. two hours run time
Factory assembled and tested
Quality Plumbing Supply is a proud distributor of Leonard Valve products. This NV-200-LF-IF-R125 Nucleus Electronic Mixing Valve is a direct replacement manufactured by Leonard Valve. Order this NV-200-LF-IF-R125 today! Usually ships in 7-10 business days. Some products may incur additional freight charges.
