Genuine JAY R. SMITH 273-B-024-EMS Surface Mount Singular Electronic Trap Primer.
REGULARLY FURNISHED: A surface mount, Floor Drain Trap Priming Device consisting of an Enclosure with Cover, Solenoid Valve, Bronze Air Gap and a Timer (factory preset to discharge once per twenty-four-hour period). This device is supplied with hardwire type electrical connections and has provisions to interface with a Building Management System (BMS) where applicable.
WORKING PRESSURE: • 20 PSI to 100 PSI
Singular electronic trap primers can be used to prime 1, or up to, 4 floor drain traps with optional distribution unit.
All wiring must follow and be in accordance with National, State and Local Electrical Codes. • The trap primer valve must be installed a minimum of 12” above flood level of device being served. Must have a minimum of 12” from bottom of outlet before a 90° elbow can be used. Allow one foot of elevation for every 20 feet of distance ran for floor drain make up line. The makeup line from trap primer to the floor drain must have continuous slope. • The furthest recommended distance from the trap primer to the floor drain is 20'. • Unit must be installed plumb and level and be accessible.
EMS (Hardwired) (Interface with the Facilities Energy Management System)
Quality Plumbing Supply is a proud distributor of Jay R. Smith products. This JAY R. SMITH 273-B-024-EMS Surface Mounted Enclosure Singular Electronic Trap Primer Interface with the Facilities Energy Management System 24 Volt is a direct replacement manufactured by Jay R. Smith. Order this JAY R. SMITH 273-B-024-EMS Surface Mounted Enclosure Singular Electronic Trap Primer Interface with the Facilities Energy Management System 24 Volt today. Most orders usually ship the same day and we offer free shipping for orders over $99!
** This Product is over 35 LBS and may incur additional shipping charges. Please call for shipping price 1-833-251-4591 **
