↑ End Headings for tabs
Genuine Prier C-633NSV 1-1/2" Mild Climate Swivel Wall Hydrant 1" MPT X 3/4" FPT.
- High flow rate, 19 gallons per minute at 25 PSI differential
- Heavy patterned, high quality brass castings
- Self-draining, even with hose attached and under pressure
- Tested to 250,000 cycles; designed to last the life of the plumbing system
- EPDM stopper with “triple seal” positive shutoff system for drip-free shutoff
- Satin nickel plated body retains original finish for years
- Can be installed in horizontal or vertical position
- Self-cleaning spring less backflow check valve prevents water hammer and system noise
- Drainage ports are large enough to drain valve, and small enough to prevent insect nesting
- Listed and labeled to ASSE 1019-B or ASSE 1052, IAPMO/C-UPC
Quality Plumbing Supply is a proud distributor of Prier products. This Prier C-633NSV 1-1/2" Mild Climate Swivel Wall Hydrant 1" MPT X 3/4" FPT is a direct replacement manufactured by Prier. Order this Prier C-633NSV 1-1/2" Mild Climate Swivel Wall Hydrant 1" MPT X 3/4" FPT today. Most orders usually ship the same day and we offer free shipping for orders over $99!
↑ Stop "Description" content here
C-633 Spec Sheet (2015 - Present)
The C-633 Series is a heavy duty wall hydrant designed for installation in mild climates. The C-633NSV has a versatile 360o swivel, while the C-633NCC has a straight brass pipe connection. Both models have inlets that will connect to either 3/4” MPT or 1” FPT pipe in tight spaces. These commercial wall hydrants are key operated, code approved, flow up to 19 GPM and have a box option that will allow for installation inside a 6” wall. The Prier C-633 Mild Climate Wall Hydrants provide a year-round hose threaded source of water for structures. The C-633 has two options; one that includes a 360 degree swivel that allows a simple piping orientation inside a narrow wall. The other, is a close-coupled design for straight supply piping applications. The ASSE 1052-approved integral vacuum breaker/backflow preventer provides protection against cross-connection with the potable water system, utilizing a check valve to prevent back pressure and a vacuum breaker to vent in the case of siphonage. A removable operating key is provided to prevent unauthorized usage of the hydrant.
↑ Stop your "Specifications" content here
C-633 Series Installation, Operation & Maintenance Sheet
The C-633 Mild Climate Commercial Wall Hydrant leaves the factory fully air tested and operational. It is treated with an FDA approved lubrication. The hydrant requires no scheduled maintenance to provide long life. If the stem is removed, the bypass O-Ring needs to be replaced and lubricated with an FDA approved lubricant to avoid tearing.
↑ Stop your "Documentation" content here
